Reply To: ESR CM Instrumentation Technique (part 1 of 2)

[Allen Ali Nasseh]

Keep in mind this video is on ESR CM. They are counterclockwise cutting files designed for reciprocating handpieces or reverse OTR. So, I’m not sure if your handpiece is capable of that. But in your comment you just said “EndoSequence Files.” Those are actually clockwise direction cutting files. You can use those with the Sybron motion they use for their Twisted Files using adaptive motion. Or you can use regular clockwise direction with 1.8Ncm torque but be careful
Not to push the files beyond engagement into excessive resistance. Good luck!