ESR CM Instrumentation Technique (part 1 of 2)
May 8, 2022 3:14 pm 2 CommentsThe original ESR CM Reciprocating file system by BrasselerUSA is explained. In the next video, an update to this protocol will be explained. …
Tag Archive: Reciprocation
ESR CM Instrumentation Update (Part 2 of 2)
May 8, 2022 3:10 pm Leave your thoughtsFollow up on the original ESR CM protocol, Dr. Nasseh talks about the addition of an extra small finishing file 20/04 as well as a 15/03 Scout file that is Austenitic! (Sharper cutting!) …
ESR CM Basic Protocol (CBL 39)
December 12, 2021 9:47 am Leave your thoughtsIn this Cased Based Learning (CBL 30) video, Dr. Nasseh demonstrates the basic protocol for the use of ESR CM. …
Conservative Reciprocation vs. Rotation Webinar (1 CEU)
March 18, 2021 1:06 pm 3 CommentsESR CM Reciprocating Files (Review)
December 21, 2020 12:26 am Leave your thoughtsDr. Nasseh shows the new ESR CM Files, files designed for reverse cutting/reciprocating but are constant taper 04 and 06 and match with the EndoSequence GP and can be used with Hydraulic Condensation. Finally, a simpler instrumentation/obturation technique. …
EndoSyncPlus Q&A
September 1, 2019 12:34 amDr. Nasseh tries to clear out some confusing points about OTR and reciprocation in this short video.…
3 ways to improve ESR cutting Efficiency with EndoSyncPlus
August 31, 2019 3:26 pmEndoSyncPlus allows open platform changes to Torque, Angles of cutting, and non-cutting direction in OTR motion along with RPM and other customization functions. These changes can make instruments more or less efficient based on a decision to improve safety vs. efficiency. For more safety, manufacturer settings are recommended, for improved efficiency, you can supercharge your EndoSyncPlus with specific changes to either 1. Decreasing the Non-Cutting Angle, 2. Increasing the Cutting Angle, or 3. Increasing the OTR Torque value.
This combination of one or more can synergistically increase efficiency. But keep in mind, any increase in efficiency comes at the cost of safety; therefore, make the right choice based on your level of expertise and the difficulty level of the tooth. Staying at Dr. Nasseh’s manufacturer settings will be fine for most beginner and intermediate users.…
EndoSyncPlus Overview Part 2 of 3.
August 5, 2019 1:25 amIn this EndoSyncPlus Overview Dr. Nasseh goes over the menu settings and various memory settings on the device and explains how to customize and change some of the settings.…
EndoSequence Reciprocating File (ESR): Using Reciprocation motion with Rhythm Motion in a Crown Down Protocol
April 24, 2018 2:45 pmWe at Real World Endo are proud to announce and share with you a file and protocol we have developed to help implement responsible use of the reciprocation motion clinically. Introducing now the EndoSequence Recirpocating Files (ESR), a series of five reverse cutting reciprocation files that when combined with the Real World Endo’s protocol for use can provide you the safety and predictabiltiy you need for your basic endodontic needs. The provided saftey through reciprocation combined with a safe protocol that manages debris and does not over torque the dentin is something we’re proud to introdue and share with you.…
